SINGLE-ROW BEARINGS

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls.As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.Single row deep groove ball bearings are available capped (with seals or shields) or open. Open bearings that are also available capped may have recesses in the ring side faces

NSK  32340 SINGLE-ROW BEARINGS

22.3 mm 1030 mm
315 mm 7.5 mm

NSK  74472/74850 SINGLE-ROW BEARINGS

24.00 mm 25.000 mm
1.00 mm 5400 N

NSK  98400/98788 SINGLE-ROW BEARINGS

38.2 mm 13 mm
14.7 34.6 mm

NSK  HR32244J SINGLE-ROW BEARINGS

1400 r/min 0.43
0.8 4GB

NSK  780/772 SINGLE-ROW BEARINGS

948 mm 369 mm
560 r/min 620 mm

NSK  HR32944J SINGLE-ROW BEARINGS

0.88 kg 3 mm
103 mm 96 mm

NSK  HM926740/HM926710 SINGLE-ROW BEARINGS

250000 N 2.50 mm
Two Shields 2200 rpm

NSK  94675/94113 SINGLE-ROW BEARINGS

13000 r/min 35 mm
34 kN 0.019 kg

NSK  EE285160/285226 SINGLE-ROW BEARINGS

8 mm 5 mm
0.25 m/s 20 N/mm²

NSK  HH234031/HH234010 SINGLE-ROW BEARINGS

380 mm 1.6
1.49 300 mm

NSK  95525/95928 SINGLE-ROW BEARINGS

45 mm 48 mm
90 mm 389 mm

NSK  863X/854 SINGLE-ROW BEARINGS

231.230 kN 11.1 mm
900 min-1 90 mm
1/15